Arms on this page are for holding an Inline Air Tools or Pistol Air Tools so that it can fasten in any direction, Vertical, Horizontal, up, down and any angle in between, without torque reaction or tool weight. While the tool will stay suspended at any height you leave it, please note that the FR holder will not lock in position. It is designed to move 360 degrees fluidly and easily without torque reaction from the tool. Because the FR holder on this page offers so much freedom of movement, when the operator lets go of the tool it may lay on its side, or flip up side down. This is a great tool arm when working at various angles but should not be the first choice if all fasteners are being driven downward (vertically) or sideways (horizontally). The arms on this page are not for use with right angle tools.
A good rule of thumb on tool holder selection is never have more freedom of angular movement then is needed for your application. Less angular movement means greater ergonomics and efficiency. But if you need the freedom to fasten or drill at any angle with your air tool then the arms on this page are the best choice.
Have questions about this or other tool holder choices ? …Call or email us. We are here to help.
PA-Series arms are meant to be used with air tools. For any other type of tool; electric, battery, hydraulic, and fixtures or gauges, you should review the EL-Series arms. Our Air Cylinder gives you the smoothest float of any method and decades of life (more than 50,000,000 rundowns).
All models on this page are available as Overhead Mount models. Just add -OM to the end of any model number. For example PA806-FR-OM.
| MODEL | DESCRIPTION | SPEC PDF | MAX. VERT. TORQUE in-lbs (Nm) | MAX. HORZ. TORQUE in-lbs (Nm) | MAX. TOOL WEIGHT lbs(Kg) | MAX. REACH in. (mm) | STANDARD BASE INCLUDED | TOOL HOLDER INCLUDED |
|---|---|---|---|---|---|---|---|---|
| PA506-FR | Standard Duty Arm for fastening with customer's Air Tool (In-line or Pistol) at any angle Vertical to Horizontal. 5/16" ID Tool Supply Hose. | Download Specs | 275 (31) | 275 (31) | 4.6 (2.1) | 40.8" (1035) | 12 inch (B125-12) | FR-TH |
| PA806-FR | Medium Duty Arm with a more rigid Parallel Rack than the 506 for fastening with customer's Air Tool (In-line or Pistol) at any angle Vertical to Horizontal. 3/8"ID Tool Supply Hose. | Download Specs | 400 (45) | 400 (45) | 4.6 (2.1) | 40.8" (1035) | 12 inch (B125-12) | FR-TH |
| PA815-FR | Heavy Duty Arm has a rigid Parallel Rack like the 806, with a larger Float Cylinder for higher tooling weights. For fastening with customer's Air Tool (In-line or Pistol) at any angle Vertical to Horizontal. 3/8"ID Tool Supply Hose. | Download Specs | 400 (45) | 400 (45) | 13.6 (6.1) | 40.8" 1035) | 12 inch (B125-12) | FR-TH |
| PA506-FRS | Standard Duty Arm for fastening with customer's Air Tool (In-line or Pistol) at any angle Vertical to Horizontal, with stops. 5/16" ID Tool Supply Hose. | Download Specs | 275 (31) | 275 (31) | 4.6 (2.1) | 40.8" (1035) | 12 inch (B125-12) | FRS-TH |
| PA806-FRS | Medium Duty Arm with a more rigid Parallel Rack than the 506 for fastening with customer's Air Tool (In-line or Pistol) at any angle Vertical to Horizontal, with stops. 3/8"ID Tool Supply Hose. | Download Specs | 400 (45) | 400 (45) | 4.6 (2.1) | 40.8" (1035) | 12 inch (B125-12) | FRS-TH |
| PA815-FRS | Heavy Duty Arm has a rigid Parallel Rack like the 806, with a larger Float Cylinder for higher tooling weights. For fastening with customer's Air Tool (In-line or Pistol) at any angle Vertical to Horizontal, with stops. 3/8"ID Tool Supply Hose. | Download Specs | 400 (45) | 400 (45) | 13.6 (6.1) | 40.8" 1035) | 12 inch (B125-12) | FRS-TH |
Finding Your Solutions
READY TO MAKE YOUR MANUFACTURING
FLOW WITH ROWE?
Contact us about ergonomic tool arms.
